| |
|
|
| |
|
|
| |
7000
Series Uni-Claim™ Slope Plate Conveyor:
Click
here to view image larger
Uni-Claim baggage conveyor systems are custom designed
to match capacity and area requirements. The 60” wide
sloped conveying surface is composed of contoured stainless
steel plates, which are rubber bumper equipped along
the base of the conveyor area, preventing baggage from
being marked or damaged. Conveyor rotation, traveling
counter-clockwise, is at a constant 90 feet per minute
to accommodate heavy traffic demands.
Application
The Uni-Claim is designed for high traffic, high-speed
baggage claim or baggage make-up systems. Uni-Claim will
accommodate above-or below-baggage loading from feed
conveyors. Stainless steel guards, covers and plates
are provided when used in public areas.
Features
|
|
| • |
Above-or
below-baggage loading for multi-level facilities. |
| • |
“Quiet-mount” leveling
screws and pads fitted with rubber vibration
isolators for reduced noise. |
| • |
Stainless
steel guards are provided for conveyors installed
in public areas. |
| • |
Duro
rubber bumper assemblies cushion for loading
and prevent baggage scuffing. |
| • |
Standard
modular assemblies allow multiple overall conveyor
sizes, configurations and easy expansion. |
| • |
Upper
and lower polyurethane wheels furnished for each
conveyor plate, producing quiet operation and
maximum load capacity. |
| General
Specifications
|
Width
of Conveyor — Surface Approximately
60"
Slope of Conveying Surface — 20°
Surface Finish — Material — 304
Stainless Steel, #4 Brush Finish
Load Capacity — 200
lbs./ft
Conveying Speed (Typical) — 90
feet per minute
Support and Guide Wheels — 4" Dia.
Polyurethane
Bumper — 50-60
Duro Rubber
Finished Trim — Stainless
Steel or Painted as Specified by Customer
Weight, lbs./linear ft. — 115
Horsepower — 5hp,
71⁄2hp, Dual 5hp, Dual 71⁄2hp |
Physical Configurations
back to top
|
|
| |
|
|
|
|
|
